If you have to lift the handle or lean on the door to lock it, you’ve already found a clue. One quick check can narrow down where the bolt catches.
If your deadbolt turns smoothly with the door open but sticks when it’s closed, check where the bolt meets the frame. The bolt may be catching the edge of the strike plate, the metal piece around the hole it slides into. A new deadbolt can catch in exactly the same spot.

What changes when you close the door?
Stand inside, open the door, and turn the thumbturn by hand. Watch the bolt extend all the way, then retract it fully before closing the door. Close the door the way you usually do and try the thumbturn again, gently. Stop if it binds.
- It sticks only when the door is closed. Look for a fresh scrape on the strike plate. If the bolt starts into the hole but stops short, the hole may be too shallow. Both clues tell a locksmith where to look.
- It sticks with the door open, too. The frame is out of the way during that test. Describe what happens at the thumbturn itself. Does it feel stiff from the start, or does the bolt move partway and stop?
Why does lifting the handle help?
Lifting the handle shifts the door slightly. If that’s enough to let the bolt slide home, check for a loose hinge or a door that sags. If the trouble started right after you added weatherstripping, mention that instead. A thicker seal can change where the door rests. A door that sticks only in humid weather is another clue worth passing along. Schlage’s door alignment checklist covers each of these clues.
What if it’s a smart lock?
Try the same open-door check with the inside thumbturn. If the bolt hits the frame by hand, changing the keypad code won’t move the frame. If it moves freely by hand in both positions but the motor stalls, look up the troubleshooting steps for your exact model. Kwikset lists latch and setup issues by model.
If the door won’t lock securely, contact your property manager or a locksmith. Give them the detail that made the difference in your test, such as “The bolt goes all the way out with the door open. When it’s closed, it scrapes unless the handle is lifted.” That tells them more than “the lock is broken.”
Find verified locksmiths near you in seconds. Transparent pricing, real-time ETAs.
Find a Locksmith →